Relação entre desmame precoce, desenvolvimento de hábitos bucais deletérios e maloclusões na infância / Relationship between early weaning, development of harmful oral habits and malocclusions in childhood

Objetivo: o objetivo desta pesquisa foi analisar a associação do tempo de aleitamento materno com a prática de hábitos deletérios e o desenvolvimento de maloclusões na primeira infância. Materiais e Métodos: foram aplicados 171 formulários às mães com 18 anos ou mais que acompanharam o processo de amamentação de seu(s) filho(s) de 4 a 10 anos de idade. O questionário foi composto por 22 perguntas, sendo 15 específicas e relacionadas ao aleitamento, hábitos deletérios da criança (uso de chupeta, sucção de dedo e sucção do próprio lábio) e maloclusões específicas (mordida cruzada posterior, mordida cruzada anterior e mordida aberta). Resultados: a prevalência da amamentação exclusiva por 6 meses ou mais foi de 52%, enquanto 29,8% das crianças foram amamentadas de 0 a 5 meses e 18,2% nunca foram amamentadas no seio exclusivamente. Quanto a alimentação complementar, grande parcela (37,4%) encontrada evidenciou início após os 6 meses; 57,9% das mães relataram algum tipo de dificuldade para amamentar e 34,5% das crianças fizeram uso de chupeta. Em relação aos hábitos deletérios, 10% desenvolveram sucção de dedo. O relato de desenvolvimento de maloclusões foi de 9,4% das crianças com mordida cruzada posterior; 7,6% mordida cruzada anterior e 18,7% mordida aberta anterior. Conclusão: sendo assim, é possível inferir que o tempo preconizado pela Organização Mundial da Saúde para aleitamento materno exclusivo foi fundamental para o não desenvolvimento de hábitos deletérios e maloclusões. Em contrapartida, quanto mais cedo a introdução de alimentos complementares, e a interrupção do aleitamento exclusivo nos seis primeiros meses, maior o risco do desenvolvimento de hábitos e consequentemente maloclusões.

Objective: the objective of this research was to analyze the association of breastfeeding duration with the practice of deleterious habits and the development of malocclusions in early childhood. Materials and Methods: a total of 171 forms were applied to mothers aged 18 years or older who followed the breastfeeding process of their child(ren) between 4 and 10 years of age. The questionnaire consisted of 22 questions, 15 of which were specific and related to breastfeeding, the child's deleterious habits (use of a pacifier, finger sucking and lip sucking) and specific malocclusions (posterior crossbite, anterior crossbite and open bite). Results: the prevalence of exclusive breastfeeding for 6 months or more was 52%, while 29.8% of children were breastfed from 0 to 5 months and 18.2% were never exclusively breastfed. As for complementary feeding, a large portion (37.4%) found to start after 6 months; 57.9% of the mothers reported some type of difficulty in breastfeeding and 34.5% of the children used a pacifier. Regarding deleterious habits, 10% developed finger sucking. The report of development of malocclusions was 9.4% of children with posterior crossbite; 7.6% anterior crossbite and 18.7% anterior open bite. Conclusion: therefore, it is possible to infer that the time recommended by the World Health Organization for exclusive breastfeeding was fundamental for the non-development of deleterious habits and malocclusions. On the other hand, the earlier the introduction of complementary foods and the interruption of exclusive breastfeeding in the first six months, the greater the risk of developing habits and, consequently, malocclusions.

Mapping of supernumerary elements in patients seeking orthodontic treatment

Dimension, number and shape alterations are frequently observed dental anomalies. Objective: The aim of this study was to map the frequency, the preferred location and the most prevalent types of supernumerary teeth, in the studied population. In addition, to assess the interference that supernumerary teeth may cause in the ectopic eruption of the normal dental series teeth. Methods: This is an observational retrospective study. Data collection was performed by evaluation of dental records of patients treated in an orthodontic clinic. Patients' radiographs, photographs and gypsum dental models were analyzed and data recorded in protocol files, by previously trained undergraduate and postgraduate students. Records from 1984 to 2019 were evaluated, and evaluation lasted two months. Data were stored in Microsoft Office Excel (version 2016) for descriptive analysis. Results: From the 920 patients' records analyzed, 2.7% presented at least one supernumerary tooth, with preferred location on the anterior maxillary area and mandibular parapremolar area. The most prevalent type was the supplemental tooth, with normal eruption orientation and normal alveolar location. Conclusion: The supernumerary teeth of the studied population showed little interference in the ectopic eruption of the normal dental series. Most of the supernumerary teeth were impacted, and, approximately one third of the supernumerary teeth showed deviated eruptions.

Introdução: Alterações de dimensão, número e forma são anomalias dentárias comumente observadas. Objetivo: O objetivo foi mapear a frequência de dentes supranumerários na população estudada, sua localização preferida e os tipos mais prevalentes. Além disso, avaliar a interferência que os dentes supranumerários podem causar na erupção ectópica da série dental normal. Métodos: A pesquisa possui desenho retrospectivo observacional. A coleta de dados foi realizada pela avaliação de prontuários odontológicos dos pacientes atendidos em uma clínica ortodôntica. Foram analisados radiografias, fotografias e modelos de gesso dental dos pacientes e as informações foram registradas em arquivos de protocolo do estudo. A coleta de dados foi realizada por uma estudante de graduação e uma da pós-graduação, previamente calibradas. A coleta durou dois meses e foram avaliados registros de 1984 a 2019. Os dados foram tratados no programa Microsoft Office Excel (version 2016) com análise descritiva dos dados. Resultados: Dos 920 prontuários analisados, 2,7% apresentavam pelo menos um dente supranumerário, com localização preferida na área superior anterior e na área parapremolar mandibular. O tipo mais prevalente foi o dente suplementar, com orientação de erupção normal e localização alveolar normal. Conclusão: Os dentes supranumerários da população estudada neste estudo mostraram pouca interferência na erupção ectópica da série dental normal. A maioria dos dentes supranumerários estava em posição de impactação. E, aproximadamente um terço dos dentes supranumerários apresentaram desvios de erupção.

Remnant adhesive flash in orthodontic bonding systems with different characteristics

Introduction: Excess of adhesive around brackets negatively impact oral health of orthodontic patients. Objective: Evaluate the influence of orthodontic bonding system in removal of adhesive flash around orthodontic brackets. Methods: Based on their characteristics, four orthodontic bonding systems were selected: lightcuring adhesive (G1 - TransbondTM XT); pink pigmented light-curing adhesive (G2- TransbondTM Plus Color Change); resin-modified glass ionomer cement (G3 - FujiOrthoTM LC); and auto-curing adhesive (G4 - ConciseTM). For each group (n=10), a single operator placed metal brackets on bovine teeth (n=40) and used an explorer tip to visually remove flash excess. After curing / setting, the sampleswere taken to a stereomicroscope and the Axio Vision 4.4 software was used to measure the area of remnant adhesive flash around each bracket. The quantitative data obtained was analyzed by the Kruskal-Wallis and Dunn's post hoc test at = 0.05. Results: The results show that the resin-modified glass ionomer cement (G3) had a larger area of remnant material than the other groups. There was no statistical difference between the other groups (G1, G2, and G4), independently of pigmentation or curing technique. Conclusion: It was concluded that the use of a resin-modified glass ionomer cement results in a larger area of remnant flash excess, which can negatively impact oral health. Pigmentation and curing technique did not influence on remnant flash excess.

Introdução: O excesso de material de colagem que permanece ao redor dos bráquetes impacta negativamente a saúde bucal dos pacientes ortodônticos. Objetivo: Avaliar a influência dos sistemas de colagem ortodônticos na remoção de excesso de adesivo ao redor de bráquetes. Métodos: Baseado em suas características, quatro sistemas de colagem ortodônticos foram selecionados: adesivo fotopolimerizável (G1 ­ TransbondTM XT); adesivo fotopolimerizável com pigmentação rosa (G2 - TransbondTM Plus Color Change); cimento de ionômero de vidro reforçado com resina (G3 - FujiOrthoTM LC); e adesivo autopolimerizável (G4 - ConciseTM). Para cada grupo (n=10), um único operador posicionou os bráquetes em dentes bovinos (n=40) e utilizou uma sonda exploradora para remoção visual do excesso de material de colagem. Após a polimerização / tempo de cura, as amostras foram levadas ao estereomicroscópio e o software Axio Vision 4,4 foi utilizado para mensurar a área de excesso de adesivo remanescente ao redor de cada bráquete. Os dados quantitativos obtidos foram analisados pelos testes de Kruskal-Wallis e post-hoc de Dunn em significância de = 0,05. Resultados: O cimento de ionômero de vidro reforçado por resina (G3) apresentou a maior área de remanescente de excesso. Não houve diferença estatisticamente significativa entre os demais grupos (G1, G2 e G4), independente da pigmentação ou do método de polimerização. Conclusão: O uso de cimento de ionômero de vidro reforçado por resina resulta em maior área de excesso remanescente, o que pode impactar negativamente a saúde bucal. A pigmentação e o método de polimerização não influenciaram no excesso de material remanescente.

What are the advantages of living in a community? A microbial biofilm perspective!

Biofilm formation is the preferred mode of growth lifestyle for many microorganisms, including bacterial and fungal human pathogens. Biofilm is a strong and dynamic structure that confers a broad range of advantages to its members, such as adhesion/cohesion capabilities, mechanical properties, nutritional sources, metabolite exchange platform, cellular communication, protection and resistance to drugs (e.g., antimicrobials, antiseptics, and disinfectants), environmental stresses (e.g., dehydration and ultraviolet light), host immune attacks (e.g., antibodies, complement system, antimicrobial peptides, and phagocytes), and shear forces. Microbial biofilms cause problems in the hospital environment, generating high healthcare costs and prolonged patient stay, which can result in further secondary microbial infections and various health complications. Consequently, both public and private investments must be made to ensure better patient management, as well as to find novel therapeutic strategies to circumvent the resistance and resilience profiles arising from biofilm-associated microbial infections. In this work, we present a general overview of microbial biofilm formation and its relevance within the biomedical context.

Influence of Primekote® polymer in orthodontic bonding / Influência do polímero Primekote® na colagem ortodôntica

Objective: The Primekote® (TP) polymer was incorporated to the of Orthodontic Bracket mesh base to improve bond strength and make it more efficient. The purpose of this study was to assess the shear bond strength and adhesive remnant index (ARI) of these brackets. Material and method: The test sample consisted of thirty bovine incisors divided into 2 groups: with a group with TP® brackets (n=15), and a control group with Morelli® brackets (n=15) without Primekote® technology. The TransbondTM XT was used as adhesive system in both groups, following the same protocol and manufacturer’s instructions. Specimens were stored in distilled water for 24 hours and then submitted to shear bond strength test in a universal testing machine (EMIC DL2000). The assessment of ARI was performed under stereomicroscope by two calibrated examiners. Result: No significant differences (p>0.05) in shear bond strength were found between the two groups according to the independent t-test. The Wilcoxon test was used to assess ARI data and statistical difference was found between Morelli® and TP® Nu-Edge brackets; the last one left less remaining adhesive on tooth surface. Conclusion: TP® brackets had higher adherence to the adhesive system as shown by lower ARI scores, but this does not improve its clinical performance.

Objetivo: Avaliar a resistência ao cisalhamento e o índice de remanescente adesivo (IRA) dos bráquetes que tiveram o polímero Primekote® incorporado a suas bases. Material e método: Foram confeccionados trinta corpos de prova com incisivos bovinos, divididos em dois grupos: o colado com bráquete TP® Nu-Edge(n=15) e grupo controle com bráquetes Morelli® (n=15) sem tratamento na base. O sistema adesivo TransbondTM XT foi utilizado nos dois grupos seguindo o mesmo protocolo de colagem e respeitando as instruções do fabricante. Os corpos de prova foram armazenados em água destilada por 24 horas, e posteriormente submetidos ao teste de cisalhamento na máquina de ensaios universais (EMIC-DL2000). O IRA foi avaliado por dois examinadores calibrados utilizando lupa estereoscópica com aumento de 20 vezes. Resultado: Na resistência ao cisalhamento o teste T-independente mostrou não haver diferença estatisticamente significante entre os grupos (p>0,05), ambos tiveram desempenho semelhante. O teste Wilcoxon foi utilizado nos valores obtidos no IRA revelando diferença estatística, sendo que os bráquetes TP® deixaram menos remanescente adesivo na superfície dental que os bráquetes Morelli®. Conclusão: Bráquetes TP® apresentaram maior adesão ao sistema adesivo pois foi encontrado menor IRA nos mesmos, porém esta característica não reflete em melhora no desempenho clínico.

New methodology for evaluating osteoclastic activity induced by orthodontic load

Orthodontic tooth movement (OTM) is a dynamic process of bone modeling involving osteoclast-driven resorption on the compression side. Consequently, to estimate the influence of various situations on tooth movement, experimental studies need to analyze this cell. Objectives The aim of this study was to test and validate a new method for evaluating osteoclastic activity stimulated by mechanical loading based on the fractal analysis of the periodontal ligament (PDL)-bone interface. Material and Methods The mandibular right first molars of 14 rabbits were tipped mesially by a coil spring exerting a constant force of 85 cN. To evaluate the actual influence of osteoclasts on fractal dimension of bone surface, alendronate (3 mg/Kg) was injected weekly in seven of those rabbits. After 21 days, the animals were killed and their jaws were processed for histological evaluation. Osteoclast counts and fractal analysis (by the box counting method) of the PDL-bone interface were performed in histological sections of the right and left sides of the mandible. Results An increase in the number of osteoclasts and in fractal dimension after OTM only happened when alendronate was not administered. Strong correlation was found between the number of osteoclasts and fractal dimension. Conclusions Our results suggest that osteoclastic activity leads to an increase in bone surface irregularity, which can be quantified by its fractal dimension. This makes fractal analysis by the box counting method a potential tool for the assessment of osteoclastic activity on bone surfaces in microscopic examination. .

Avaliação longitudinal em pacientes com má oclusão de Classe II Divisão 1 submetidos ao tratamento ortodôntico sem extrações – análise de modelos / Long-term evaluation in Class II Division 1 patients after nonextraction orthodontic treatment – Dental cast analysis

O objetivo deste estudo longitudinal foi avaliar as alterações dentárias pós-tratamento e em longo prazo em pacientes Classe II Divisão 1 de Angle tratados com aparelho extrabucal cervical e aparelho ortodôntico fixo sem extrações dentárias. Os modelos dentários de 33 pacientes foram avaliados no pré-tratamento (T1), pós-tratamento (T2) e pós-contenção (T3). Os pacientes apresentavam em média 10,7 anos em T1, 15,1 anos em T2, e 26,2 anos no T3. As larguras intermolares e intercaninos, comprimento do arco, perímetro do arco, overjet, overbite e irregularidade dos incisivos inferiores foram avaliados nos modelos do arco maxilar e mandibular. Para identificar mudanças estatisticamente significativas em curto prazo (T1-T2) e longo prazo (T2-T3) foi utilizado o teste t de Student. Os resultados mostraram que, durante o tratamento, as larguras do arco maxilar e mandibular foram significativamente aumentadas, tanto nas regiões de molares quanto de caninos, e reduzidas no período pós-contenção. Durante o tratamento apenas o comprimento do arco mandibular reduziu, no entanto, em T3, o perímetro e o comprimento diminuíram em ambos os arcos. Overjet e overbite diminuíram em média 5,5 mm e 2,1 mm, respectivamente, no pós-tratamento e ambos aumentaram (média de 0,5 mm e 0,4 mm) na avaliação pós-contenção. A irregularidade dos incisivos inferiores diminuiu em média de 1,9 mm durante o tratamento e aumentou em média 1,1 mm depois do tratamento. Concluiu-se que a terapia utilizada foi eficaz para a correção da má oclusão de Classe II Divisão 1. Após o período de contenção, mínimas alterações dentárias podem ser esperadas na largura intercanino e intermolar, perímetro e comprimento dos arcos, irregularidade dos incisivos e overjet.

The aim of this longitudinal study was to evaluate the post-treatment and long-term dental changes in Class II Division 1 malocclusion patients treated with cervical headgear in conjunction with full-fixed appliance in nonextraction therapy. Dental casts of 33 patients were evaluated at: pretreatment (T1), post-treatment (T2), and postretention (T3). The mean ages were 10.7 years at T1, 15.1 years at T2, and 26.2 years at T3. Molars and canines transversal widths, arch length, arch perimeter, overjet, overbite and lower incisor irregularity were assessed on maxillary and mandibular dental casts. To identify statistically significant changes in short term (T1-T2) and long-term (T2-T3) was used the Student paired t test. The results showed that, during treatment, maxillary and mandibular widths have increased significantly, at both, molar and canine regions and reduced in postretention period. During treatment only mandibular arch length showed reduction, however at T3 perimeter and length, decreased for maxillary and mandibular arches. Overjet and overbite had a mean decreased, during treatment of 5.5 mm and 2.1 mm, respectively, and both increased (mean of 0.5 mm and 0.4mm) in postretention evaluation. Lower incisor irregularity decreased mean was 1.9 mm during treatment and increased mean of 1.1 mm after. The therapy used was effective for Class II Division 1 malocclusion correction. After the retention period small dental changes can be expected in intercanine and intermolar width, arch perimeter and length, incisor irregularity and overjet.

Comparison of 2 types of treatment of skeletal Class II malocclusions: a 5-year post-retention analysis

Aim: To compare 2 types of treatment for Class II malocclusion assessing mandibular behavior in subjects submitted to full orthodontic treatment with standard edgewise appliance and cervical headgear (Kloehn appliance) and those who used cervical headgear in the first period and with full orthodontic appliance in the second period. Methods: The sample consisted of 80 children treated with either cervical headgear combined with full fixed appliances (n=40, group 1), or with cervical headgear at first (n=40, group 2). In both groups, lateral cephalometric radiographs were compared with those made at the beginning of treatment, at its end and at 5-year post-retention phase, in order to quantify the cephalometric measures (8 angular and 3 linear), presenting the mandibular behavior in the antero-posterior and vertical directions. All patients were treated with no extraction and no use of Class II intermaxillary elastics during the full orthodontic treatment. Results: In both groups, the effective treatment of skeletal Class II malocclusion did not interfere in the direction and amount of growth of mandibular condyles and remodeling at the lower border, with no influence on the anti-clockwise rotation of the mandible. The mandibular growth also was observed after the orthodontic treatment, suggesting that it is influenced by genetic factors. Conclusions: These observations may lead to the speculation that growing patients with skeletal Class II malocclusion and low mandibular plane are conducive to a good treatment and long-term stability with one or two periods of treatment.

Changes in skeletal and dental relationship in Class II Division I malocclusion after rapid maxillary expansion: a prospective study

OBJECTIVE: To assess skeletal and dental changes immediately after rapid maxillary expansion (RME) in Class II Division 1 malocclusion patients and after a retention period, using cone beam computed tomography (CBCT) imaging. METHODS: Seventeen children with Class II, Division 1 malocclusion and maxillary skeletal transverse deficiency underwent RME following the Haas protocol. CBCT were taken before treatment (T1), at the end of the active expansion phase (T2) and after a retention period of 6 months (T3). The scanned images were measured anteroposteriorly (SNA, SNB, ANB, overjet and MR) and vertically (N-ANS, ANS-Me, N-Me and overbite). RESULTS: Significant differences were identified immediately after RME as the maxilla moved forward, the mandible moved downward, overjet increased and overbite decreased. During the retention period, the maxilla relapsed backwards and the mandible was displaced forward, leaving patients with an overall increase in anterior facial height. CONCLUSION: RME treatment allowed more anterior than inferior positioning of the mandible during the retention period, thus significantly improving Class II dental relationship in 75% of the patients evaluated. .

OBJETIVO: avaliar, por meio de imagens de tomografia computadorizada de feixe cônico (TCFC), as mudanças esqueléticas e dentárias, imediatas e após 6 meses de contenção, causadas pela expansão rápida da maxila (ERM) em pacientes com má oclusão de Classe II, divisão 1. MÉTODOS: dezessete crianças com má oclusão de Classe II, divisão 1, e deficiência transversal da maxila, foram submetidas a ERM, de acordo com o protocolo proposto por Haas. TCFC foram realizadas antes da ERM (T1), imediatamente após a fase ativa (T2) e após 6 meses de contenção (T3). Alterações anteroposteriores (SNA, SNB, ANB, overjet e RM) e verticais (N-ANS, ANS-Me, N-Me e overbite) foram analisadas. RESULTADOS: imediatamente após a ERM, enquanto a maxila se deslocou para frente, a mandíbula se movimentou para frente e para baixo, aumentando o overjet e diminuindo o overbite. Durante o período de contenção, a maxila retornou para posterior e a mandíbula deslocou em direção anterior, aumentando a altura facial anterior. CONCLUSÃO: a realização da ERM permitiu que a mandíbula se posicionasse mais anteriormente do que inferior durante o período de contenção, melhorando a relação molar de Classe II em 75% dos pacientes avaliados. .

Evaluation of two protocols for low-level laser application in patients submitted to orthodontic treatment

INTRODUCTION: Different low-level laser (LLL) irradiation protocols have been tested to accelerate orthodontic tooth movement (OTM). Nevertheless, divergent results have been obtained. It was suggested that the stimulatory action of low level laser irradiation occurs during the proliferation and differentiation stages of bone cellular precursors, but not during later stages. OBJECTIVE: The purpose of this study was to determine the effect of two protocols of LLL irradiation on experimental tooth movement: One with daily irradiations and another with irradiations during the early stages. METHODS: Thirty-six rats were divided into control groups (CG1, CG2, CG3) and irradiated groups (IrG1, IrG2, IrG3) according to the presence of: experimental tooth movement, laser irradiation, type of laser irradiation protocol and date of euthanasia (3th or 8th day of experiment). At the end of experimental periods, a quantitative evaluation of the amount of OTM was made and the reactions of the periodontium were analyzed by describing cellular and tissue reactions and by counting blood vessels. RESULTS: The amount of OTM revealed no significant differences between groups in the same experimental period (p < 0.05). Qualitative analysis revealed the strongest resorption activity in irradiated groups after seven days, especially when using the daily irradiation protocol. There was a higher number of blood vessels in irradiated animals than in animals without orthodontic devices and without laser irradiation (p < 0.05). CONCLUSION: Moreover, angiogenesis was verified in some of the irradiated groups. The irradiation protocols tested were not able to accelerate OTM and root resorption was observed while they were applied.

INTRODUÇÃO: diferentes protocolos de irradiação por laser de baixa potência (LBP) têm sido testados para potencializar o movimento ortodôntico; entretanto, há resultados divergentes. Foi sugerido que seu efeito bioestimulador ocorre nas fases de proliferação e diferenciação celular, não agindo em estágios tardios. OBJETIVO: avaliar o efeito de dois protocolos de irradiação do LBP na movimentação ortodôntica: um com irradiações diárias e outro em que irradiações foram realizadas apenas nos períodos iniciais. MÉTODOS: trinta e seis ratos Wistar foram divididos em grupos controles (GC1, GC2 e GC3) e irradiados (GIr1, GIr2 e GIr3), de acordo com a presença de dispositivo ortodôntico, a presença de irradiação, o tipo de protocolo de irradiação e a data de eutanásia (3º ou 8º dia de experimento). Ao final dos períodos experimentais, foram realizadas mensurações da movimentação dentária, análise qualitativa das reações celulares e teciduais do periodonto e contagem de vasos sanguíneos no ligamento periodontal. RESULTADOS: a quantidade de movimentação não diferiu entre os grupos num mesmo tempo experimental (p < 0,05). A análise qualitativa revelou maior atividade absortiva nos grupos irradiados ao final de 7 dias, especialmente quando as irradiações foram diárias. Nos grupos irradiados diariamente, a contagem de vasos foi aumentada em relação aos animais isentos de dispositivo ortodôntico e de aplicações de LBP (p < 0,05). CONCLUSÃO: apesar de verificada angiogênese em certos grupos irradiados, os protocolos de irradiação testados não foram capazes de acelerar a movimentação dentária, e foi possível verificarem-se absorções radiculares.

Class II malocclusion with deep overbite: a sequential approach

OBJECTIVE: The aim of this case report was to evaluate the results of deep overbite correction by the segmented arch technique. METHODS: The first stage of the treatment was performed with this technique to intrude incisors and canines. A maxillary transpalatal bar and a mandibular lingual arch using 0.051-in archwire were employed associated to a facial bow, anchored primarily with occipital pull and, after molar relationship correction, changed to high pull. RESULTS: Upper incisors presented a great amount of intrusion and some palatal root inclination as programmed in the treatment plan. The skeletal mandibular response was favorable to achieve profile balance. Periapical radiograph showed rounded apex of incisor roots, expected in any orthodontic intrusion movement. CONCLUSION: The clinical results present the successful approach to deep overbite malocclusion.

OBJETIVO: o objetivo desse relato de caso clínico foi avaliar os resultados da correção da sobremordida exagerada por meio da técnica do arco segmentado. MÉTODOS: na primeira etapa do tratamento, utilizou-se essa técnica para intrusão dos incisivos e caninos. Em seguida, foram confeccionados e instalados uma barra transpalatina superior e um arco lingual inferior, ambos com fio de 0,051" de espessura, sendo associados ao arco facial ancorado, primeiramente, em tração occipital e, após a correção da chave de oclusão, foi modificada para tração parietal. RESULTADOS: os incisivos superiores apresentaram grande quantidade de intrusão com discreta inclinação palatal das raízes, conforme determinado no plano de tratamento. A resposta mandibular foi favorável, possibilitando o alcance de perfil mais harmonioso. Nas radiografias periapicais, observou-se suave arredondamento apical nas raízes dos incisivos, compatível com movimento de intrusão. CONCLUSÃO: os resultados clínicos conferem sucesso na abordagem da correção da sobremordida exagerada.

Long-term maxillary behavior in treated skeletal class II malocclusion

Aim: To evaluate the post-treatment and long-term anteroposterior and vertical maxillary changesfrom the use of Kloehn cervical headgear in treated skeletal Class II Division 1 malocclusion.Methods: Using a longitudinal prospective study design, 90 lateral radiographs of 30 treatedpatients (12 male gender and 18 female gender) were taken at the beginning of the treatment (meanage = 10 years and 9 month), at the end of the treatment (mean age = 14 years and 6 months), andin the post-retention phases (mean age = 26 years and 2 months). Lateral radiographs of 30 adultspatients with Class II malocclusion, as control group (mean age = 24 years and 1 month) werecompared with lateral radiographs of patients in the post-retention phase in order to quantify thecephalometric measurements (5 angular and 2 linear) representing the maxillary position in theanteroposterior and vertical direction. Results: Under the effect of treatment, forward displacementof the maxilla was redirected in a downwards and backwards direction. When the means of thefemale measurements were compared between the two groups, only ANB was greater in the controlgroup. When the male measurements were compared, they presented a mean value of ANBgreater in the control group, and the mean of SNPP greater in the treated group. Conclusions: Inthe post-retention phase, maxillary displacement reverted in a downward and forward direction,confirming the transitory effect of the extra-oral action on maxillary displacement.

Do self-ligating brackets favor greater bacterial aggregation?

Aim: To verify the hypothesis that self-ligating brackets favor greater aggregation of microorganisms when compared with conventional brackets. Methods: Four types of self-ligating metal brackets were evaluated. Initially, 50 brackets were divided into five groups (n=10): Morelli Conventional, GAC (In-Ovation R, Dentsply Caulk), Aditek (Easy Clip), Ormco (Damon System) and 3M Unitek (Smart Clip). An in vivo evaluation was carried out in which the brackets were bonded to the mandibular teeth of five healthy individuals who had not undergone previous orthodontic treatment. The right hemiarch brackets were used for bacterial plaque collection and those on the left side were examined by scanning electron microscopy (SEM). Before bracket bonding, the bacterial plaque material aggregated to the tooth surfaces was collected, with the areas of choice being the cervical-buccal and mesial and distal interproximal regions. After 21 days had elapsed since bonding, the plaque adhered to the winglet, channel and cervical regions of the bracket bases was collected. The materials collected were diluted and seeded on Petri dishes onto Mitis salivarius medium specific for S. mutans and non-specified BHI culture medium. Colony forming unit (CFU) counts were performed visually after 24, 48 and 72 h of incubation. Results: Greater bacterial accumulation was observed on the winglets of 3M brackets, with statistical statistically significant differences from the other types (p<0.05). As regards the channel regions, most microorganisms accumulated in the Ormco Group (p<0.05), and in the cervical region of Aditek brackets. In all evaluated regions, those with least bacterial accumulation were the conventional brackets. Conclusions: The hypothesis was confirmed, as the self-ligating brackets were shown to have greater bacterial accumulation when compared with the conventional brackets.

Board Brasileiro de Ortodontia e Ortopedia Facial: certificando excelência / Brazilian Board of Orthodontics and Facial Orthopedics: certifying excellence

O Board Brasileiro de Ortodontia e Ortopedia Facial (BBO) é uma entidade de Certificação Nacional de padrão de excelência clínica no exercício da especialidade. O artigo, ora apresentado, traz o histórico da criação do BBO, sua estrutura e as fases que compõem a avaliação para obtenção da Certificação. Apresenta, ainda, o relato do primeiro exame aplicado no Brasil. O objetivo é multiplicar o conhecimento, entre os profissionais da área, sobre a importância da Certificação BBO como garantia do mais alto grau de qualidade no tratamento ortodôntico.

The Brazilian Board of Orthodontics and Facial Orthopedics (BBO) is the institution that certifies the standards of clinical excellence in the practice of this specialty. This article describes the history of BBO's creation and the examination structure and phases to obtain the BBO Certification. It also presents a detailed report of the first exam applied in Brazil. Its purpose is to expand the knowledge, among professionals in the area, about the importance of BBO Certification as assurance of the highest level of quality in orthodontic treatments.

Análise química e morfológica do esmalte dentário humano tratado com laser argônio durante a colagem ortodôntica / Chemical and morphological analysis of the human dental enamel treated with argon laser during orthodontic bonding

INTRODUÇÃO: as principais utilizações do laser argônio na Ortodontia são a redução do tempo de polimerização durante a colagem ortodôntica e o aumento da resistência à cárie do esmalte dentário. OBJETIVO: o objetivo deste trabalho foi avaliar as alterações químicas e morfológicas do esmalte dentário humano tratado com laser argônio nos parâmetros da colagem ortodôntica. MÉTODOS: quinze primeiros pré-molares hígidos, extraídos por indicação ortodôntica, foram selecionados e seccionados no sentido do longo eixo em dois segmentos iguais. Uma metade de cada elemento dentário foi tratada e a outra permaneceu sem tratamento. Um total de 30 amostras foi analisado, criando o grupo laser (n = 15) e o grupo controle (n = 15). O tratamento foi feito com laser argônio com 250mW de potência por 5 segundos, com densidade de energia de 8J/cm². RESULTADOS: a análise de difração de raios X demonstrou duas fases em ambos os grupos, as fases apatita e monetita. A redução da fase monetita foi significativa após o tratamento com laser, sugerindo maior cristalinidade. A análise de Espectroscopia de Energia Dispersiva (EDS) indicou aumento na razão cálcio-fósforo no grupo laser, compatível com a diminuição da fase monetita. A morfologia superficial do esmalte dentário apresentou-se mais lisa após o tratamento com laser argônio. CONCLUSÕES: o aumento de cristalinidade e a lisura superficial do esmalte no grupo laser são fatores sugestivos de aumento de resistência à cárie no esmalte dentário.

INTRODUCTION: The main utilities of the argon laser in orthodontics are the high speed curing process in orthodontic bonding and the caries resistance promotion of the tooth enamel. OBJECTIVE: The objective of this study was to evaluate the chemical and morphological changes in the tooth enamel treated with the argon laser in the orthodontic bonding parameters. METHODS: Fifteen sound human first premolars, removed for orthodontic reason, were selected and sectioned across the long axis in two equal segments. One section of each tooth was treated and the other remained untreated. A total of thirty samples was analyzed, creating the laser group (n =15) and the control group (n =15). The treatment was done with 250 mW argon laser beam for 5 seconds, with energy density of 8 J/cm². RESULTS: The X-ray analysis demonstrated two different phases in both groups, the apatite and the monetite phases. The reduction of the monetite phase was significant following laser treatment, suggesting higher crystallinity. The EDS analysis showed an increase in the calcium-phosphorus ratio in the laser group, linked with the decrease of the monetite phase. CONCLUSIONS: The surface morphology was smoother after the laser exposure. The results of high crystallinity and superficial enamel smoothness in the laser group are suggestive of the caries resistance increase of the tooth enamel.

Friction between different wire bracket combinations in artificial saliva: an in vitro evaluation

OBJECTIVE: The objective this work was to assess the friction coefficient between brackets and wires of different materials under conditions simulating the oral environment. MATERIAL AND METHODS: Stainless steel (SS) and titanium-molybdenum alloy (TMA) wires of 0.019x0.025-in diameter (American Orthodontics) and polycarbonate bracket (American Orthodontics), ceramic bracket (American Orthodontics), and metal bracket (3M Unitek) with slots of 0.022x0.030-in were used. The friction coefficient was assessed by means of mechanical traction with the system immersed in artificial saliva. The mean roughness of both wire surface and bracket slots was evaluated by using a surface profilometer. RESULTS: The system using TMA wire and polycarbonate bracket had the highest roughness (p<0.05). SS wire with ceramic bracket had the highest friction coefficient, whereas the use of metallic bracket yielded the lowest (p<0.05). However, it was observed a statistically significant difference in the system using TMA wire and ceramic bracket compared to that using TMA wire and polycarbonate bracket (p=0.038). CONCLUSIONS: Ceramic brackets in association with SS wire should be judiciously used, since this system showed a high friction coefficient.

Correlations between dentoskeletal variables and deep bite in Class II Division 1 individuals

This study aimed to evaluate the cephalometric pattern of Class II Division 1 individuals with deep bite, and to determine possible correlations between dentoskeletal variables and deep bite. Comparisons were also made between genders and cases that were to be treated both with and without premolar extraction. A total of 70 lateral cephalograms were used, from both male (n = 35) and female (n = 35) individuals with an average age of 11.6 years, who simultaneously presented with ANB > 5º and overbite > 4 mm. Statistical analysis involved parametric (t-test) and non-parametric (Mann-Whitney) tests for independent samples, as well as the Spearman correlation test (p < 0.05). The values of Go-Me, Ar-Pog, PM-1 and PM-CMI were higher in males (p < 0.05). However, no significant differences were found among the averages of the cephalometric measurements when the sample was divided by treatment with and without extraction. Deep bite was positively correlated to the PM-1 and SNA measurements, and negatively correlated to the Go-Me, Ar-Pog, SNB and SNGoMe measurements. The main factors associated with the determination of deep bite in Angle's Class II Division 1 cases were: greater lower anterior dentoalveolar growth and/or lower incisor extrusion, horizontal growth pattern, maxillary protrusion and mandibular retrusion.

Relationship between maxillary canine intra-alveolar position and maxillary incisor angulation: a cone beam computed tomography study

The aims of the present study were to evaluate the angulation and inclination of permanent maxillary incisors and to correlate the results to the intra-alveolar permanent maxillary canine position during mixed dentition, using cone beam computed tomography (CBCT). The subjects were 30 children aged 7 to 10 years in the inter-transitory period of mixed dentition (permanent incisors and first molars erupted; primary canines, first and second molars erupted; and permanent canines intraosseous). The CBCT scans were obtained and, using the Dolphin Imaging® software - version 11.0, 3D images were reconstructed and the measurements were performed. The angulation of the right and left lateral and central maxillary incisors was measured in relation to the sagittal plane and their inclination was measured in relation to the coronal plane. The intra-alveolar height of the right and left maxillary canines was measured from the cusp tip to the axial plane. Pearson's correlation at 5 percent significance level showed positive correlation between the canine height and the lateral incisor angulation. It was concluded that the intra-alveolar position of the maxillary canines has a direct influence on the angulation of maxillary incisors, especially the lateral incisors.

Os objetivos deste estudo foram avaliar, por meio de tomografia computadorizada de feixe cônico (TCFC), a inclinação mésio-distal e vestíbulo-lingual dos incisivos permanente superiores e correlacionar os resultados com o posicionamento intra-ósseo do canino permanente superior na dentição mista. Foram selecionadas 30 crianças, entre 7 e 10 anos de idade, no período inicial de dentição mista, apresentando incisivos e primeiros molares permanentes erupcionados, caninos, primeiros e segundos molares decíduos presentes na cavidade bucal e caninos permanentes intra-ósseos. Foi realizada TCFC e com o software Dolphin Imaging®, versão 11.0 foi realizada a reconstrução em 3D destas imagens e feitas as medidas. A inclinação dos incisivos centrais e laterais superiores direito e esquerdo foi medida em relação ao plano sagital (angulação mésio-distal) e ao plano coronal (inclinação vestíbulo-lingual). A altura intra-óssea dos caninos superiores direito e esquerdo foi medida da ponta da cúspide ao plano axial. Para análise da correlação entre a angulação dos incisivos e altura dos caninos foi utilizado o teste de correlação de Pearson, ao nível de significância de 5 por cento. Pode-se concluir que a posição intra-óssea dos caninos superiores sugere influência direta na inclinação dos incisivos superiores, principalmente nos incisivos laterais.

Análise de dentição mista: tomografia versus predição e medida radiográfica / Mixed-dentition analysis: Tomography versus radiographic prediction and measurement

OBJETIVO: o objetivo dos autores desse estudo foi comparar o método de análise de dentição mista que utiliza tomografia computadorizada de feixe cônico para avaliar os diâmetros dos dentes intraósseos com os métodos de Moyers, Tanaka-Johnston e radiografias oblíquas em 45º. MÉTODOS: foram realizadas medidas, na arcada inferior, dos diâmetros mesiodistais dos incisivos permanentes irrompidos, nos modelos de gesso com auxílio de paquímetro digital e estimativa do tamanho de pré-molares e caninos permanentes ainda não irrompidos utilizando-se a tabela de Moyers e a fórmula de predição de Tanaka-Johnston. Nas radiografias oblíquas em 45º, caninos e pré-molares foram medidos utilizando-se o mesmo instrumento. Nas tomografias, as mesmas unidades dentárias foram aferidas por meio de ferramentas do programa Dolphin. RESULTADOS: a análise estatística revelou elevada concordância entre o método tomográfico e o radiográfico, e baixa concordância entre o tomográfico e os demais avaliados. CONCLUSÃO: a tomografia computadorizada de feixe cônico mostrou-se confiável para análise da dentição mista e apresenta algumas vantagens em relação aos métodos comparados: a observação e mensuração dos dentes intraósseos individualmente, com a possibilidade, contudo, de visualizá-los sob diferentes perspectivas e sem superposição de estruturas anatômicas.

OBJECTIVE: The aim of this study was to evaluate the method for mixed-dentition analysis using Cone-Beam Computed Tomography for assessing the diameter of intra-osseous teeth and compare the results with those obtained by Moyers, Tanaka-Johnston, and 45-degree oblique radiographs. METHODS: Measurements of mesial-distal diameters of erupted lower permanent incisors were made on plaster cast models by using a digital calliper, whereas assessment of the size of non-erupted permanent pre-molars and canines was performed by using Moyer's table and Tanaka-Johnston's prediction formula. For 45-degree oblique radiographs, both canines and pre-molars were measured by using the same instrument. For tomographs, the same dental units were gauged by means of Dolphin software resources. RESULTS: Statistic analysis revealed high agreement between tomographic and radiographic methods, and low agreement between tomographs and other methods being evaluated. CONCLUSION: Cone-Beam Computed Tomography was accurate for mixed-dentition analysis in addition to presenting some advantages over compared measurement methods: observation and measurement of intra-osseous teeth individually with the possibility, however, to view them from different prospects and without superimposition of anatomical structures.

Analysis of mechanical properties and forces produced by transpalatal bars made from low-nickel alloy

Aim: This study evaluated assess the mechanical properties and forces produced by transpalatal bars made from low-nickel alloy. Methods: Using a template, a single operator made all transpalatal bars from 0.032" and 0.036" wires of two different alloys, thus originating four groups, namely: A8 (0.032" conventional stainless steel), B8 (0.032" low-nickel stainless steel), A9 (0.036" conventional stainless steel), and B9 (0.036" low-nickel stainless steel). The bars were then activated and mounted onto a device developed to serve as a support for mechanical assay in a universal testing machine (Emic DL 10.000). The values of resilience and ductility were obtained using the Origin 8 software. Results: No statistically significant differences (P > 0.05) were observed between Groups A8 and B8 neither between A9 and B9 for 0.5-, 1.0-, and 5-mm deformations. However, statistically significant differences (P < 0.05) were found in all groups for 15-mm deformation. Groups B8 and B9 showed greater ductility and resilience compared to groups A8 and A9, respectively. Conclusions: Low-nickel stainless steel transpalatal bars release the same amount of force for activations less than 10 mm compared to those made from conventional stainless steel. Mechanically, the low-nickel stainless steel bars are more ductile and resilient.